A mega pixel (written megapixel, or MP) is one million pixels, the tiny dots that make up a digital photo. More megapixels give you more resolution, which means more room to crop, zoom and print large, but they don’t guarantee better photos. Sensor size, lens quality and processing matter just as much, and that explains why a 48 MP iPhone can match or beat a 200 MP rival.
1 MP1,000,000 pixels
12 MP photo4000 x 3000 pixels
4K video frameAbout 8.3 MP
Phone sweet spot48-50 MP sensor
What a megapixel actually is
A digital image is a grid. Every cell in that grid is a pixel, and each pixel stores one color value. Multiply the width of the grid by its height and you get the total pixel count. Divide that by one million and you have the megapixel figure.
Here is the math for the most common phone photo size:
- 4000 pixels wide x 3000 pixels tall = 12,000,000 pixels
- 12,000,000 ÷ 1,000,000 = 12 MP
That 4000 x 3000 grid has a 4:3 shape, the native aspect ratio of almost every phone camera sensor. Switch to 16:9 and the phone crops the top and bottom, so your “12 MP” camera now saves roughly 9 MP files.
The term describes two related things, and they get blurred together a lot:
- Sensor megapixels. The number of light-sensitive sites (photosites) on the camera chip.
- Image megapixels. The number of pixels in the file you actually save.
On older phones, those two numbers matched. On modern phones they rarely do, for reasons covered in the pixel binning section below.
Common resolutions and what they equal
| Megapixels |
Pixel dimensions (4:3) |
Where you see it |
| 2 MP |
1632 x 1224 |
Macro and depth cameras on budget phones |
| 8 MP |
3264 x 2448 |
Older main cameras, some telephotos |
| 12 MP |
4000 x 3000 |
Default photo size on most flagships |
| 24 MP |
5712 x 4284 |
Default photo size on iPhone 15 and later |
| 48-50 MP |
about 8000 x 6000 |
Main sensors on current flagships |
| 108 MP |
12000 x 9000 |
Galaxy S20 Ultra to S22 Ultra era |
| 200 MP |
16320 x 12240 |
Galaxy S Ultra main, some periscopes |
Notice how slowly the dimensions grow. Doubling the megapixel count only increases width and height by about 41%. To double the linear detail (twice as wide, twice as tall), you need four times the megapixels. This single fact explains why a jump from 12 MP to 48 MP looks noticeable while 50 MP to 64 MP barely registers.
What “MP” means on a phone spec sheet
When you see “MP” in a mobile spec list, it means megapixels. A line like “50 MP main, 12 MP ultrawide, 10 MP telephoto” lists the sensor resolution of each rear camera.
A few things the spec sheet does not tell you:
- Default output. A 200 MP camera usually saves 12 MP files unless you change a setting.
- Sensor size. Two 50 MP sensors can differ hugely in physical size.
- Lens quality. A sharp lens on a 12 MP sensor beats a soft lens on a 50 MP one.
- Which cameras get the good sensor. Many budget phones advertise “four cameras” where two are 2 MP macro and depth units that add almost nothing.
That last point is worth stressing. A “108 MP quad camera” label on a cheap phone typically means one decent main camera plus filler. The total megapixel count across all lenses is a marketing number, not a quality score.
Buying tip
Before you buy, check the main camera’s sensor size (for example 1/1.3-inch or 1-inch type) next to the megapixel figure. Size tells you more about low-light quality than the MP number does.
Total vs. effective pixels
Dedicated cameras often list two numbers: total pixels and effective pixels. The gap between them confuses a lot of buyers, so here is what each one means.
Total pixels counts every photosite on the sensor chip. That includes pixels around the edges that never become part of your picture.
Effective pixels counts only the photosites that actually record image data in the final file.
Why would a sensor have pixels it doesn’t use? A few reasons:
- Black-level calibration. Some edge pixels are masked from light. The camera reads them to measure electronic noise, then subtracts that noise from the real image.
- Image stabilization margin. Electronic stabilization in video needs a buffer zone around the frame to shift into.
- Processing overhead. Demosaicing (rebuilding full color from the sensor’s color filter pattern) needs neighboring pixels at the edges, so a thin border gets trimmed.
The difference is usually small, a few percent. For buying decisions, effective pixels is the number that matters. Phone makers generally quote a rounded sensor figure (“50 MP,” “200 MP”) and rarely publish both numbers.
A quick word on color
Each photosite only sees one color. A grid of red, green and blue filters (the Bayer pattern) sits over the sensor, with twice as many green filters as red or blue, because human eyes are most sensitive to green. The processor estimates the two missing colors at every pixel from its neighbors.
So a 12 MP sensor doesn’t capture 12 million full-color samples. It captures 12 million single-color samples and interpolates the rest. This is one reason high-resolution sensors that downsample to a smaller file can produce cleaner color than a sensor shooting at its native size.
How megapixels affect image quality
Resolution is one ingredient in image quality, not the whole recipe. Here is where more pixels genuinely help, and where they quietly stop mattering.
Where more megapixels help
Cropping. This is the biggest real-world benefit. Shoot a 48 MP photo, crop to the middle quarter, and you still have a 12 MP image. Shoot at 12 MP and crop the same way, and you are left with 3 MP.
Large prints. A 12 MP file prints cleanly up to roughly 13 x 10 inches at photo-lab quality. Beyond that, extra pixels help.
Fine texture in good light. In bright daylight, a high-res sensor can render foliage, fabric, brickwork and distant signage with more definition. Pixel-peeping on a monitor shows it clearly.
Digital zoom quality. Phones use high-res sensors to deliver “optical-quality” 2x zoom by cropping the center of the sensor, with no telephoto lens involved.
Where more megapixels don’t help (or hurt)
Low light. Packing more pixels onto the same size sensor makes each pixel smaller. Smaller pixels catch less light each, which means more noise. Binning (covered below) solves much of this, but at the cost of the very resolution you paid for.
Dynamic range. The ability to hold detail in bright skies and dark shadows at the same time depends on sensor size, pixel design and multi-frame processing. Raw pixel count plays a minor role.
Motion. Full-resolution modes often read out the sensor more slowly and skip some multi-frame processing. Moving kids, pets and sports can come out blurrier at 200 MP than at 12 MP.
Viewing on a phone screen. Your phone’s display shows roughly 3 million pixels. Even a 12 MP photo gets scaled down by about 75% to fit. On screen, you will not see the difference between 12 MP and 200 MP until you zoom in.
Why sensor size matters more than pixel count
If one spec deserves your attention more than megapixels, it is sensor size. A bigger sensor collects more total light, and light is what every photo is made of.
Phone sensor sizes are listed in an odd legacy format: “1/1.3-inch,” “1/1.28-inch,” “1-inch type.” The bigger the second number, the smaller the sensor. A 1/2.55-inch sensor is small. A 1-inch type sensor is huge by phone standards. These “inch” labels come from old video tube sizing and don’t match any actual measurement on the chip, so treat them as a ranking, not a ruler.
The other key figure is pixel pitch, measured in micrometers (µm). It describes the width of each individual photosite. Bigger pitch means each pixel gathers more light.
Here is how the main cameras on current flagships compare. Specs are from manufacturer pages and launch coverage for phones released in 2025.
| Phone (2025) |
Main camera |
Sensor and pixel size |
Other rear cameras |
Front camera |
| iPhone 17 |
48 MP Fusion |
Not published in µm by Apple |
48 MP ultrawide |
18 MP |
| iPhone 17 Pro |
48 MP Fusion |
Quad-pixel design |
48 MP ultrawide, 48 MP 4x tele |
18 MP |
| Samsung Galaxy S25 Ultra |
200 MP |
1/1.3-inch, 0.6 µm |
50 MP ultrawide, 10 MP 3x, 50 MP 5x |
12 MP |
| Google Pixel 10 Pro |
50 MP |
1/1.31-inch, 1.2 µm |
48 MP ultrawide, 48 MP 5x tele |
42 MP |
| Xiaomi 15 Ultra |
50 MP (Sony LYT-900) |
1-inch type, 1.6 µm |
50 MP ultrawide, 50 MP 3x, 200 MP 4.3x |
32 MP |
Look at the Galaxy S25 Ultra and Pixel 10 Pro rows. Their sensors are almost exactly the same physical size. Samsung divides that area into 200 million photosites at 0.6 µm each. Google divides it into 50 million at 1.2 µm each. Each Pixel photosite is twice as wide and catches about four times the light.
Neither approach is wrong. Samsung bets on flexibility (bin down in the dark, use full resolution in daylight). Google bets on bigger native pixels and heavy computational processing. In head-to-head reviews from major outlets, the two trade wins depending on the scene, which tells you megapixels alone don’t settle the question.
The Xiaomi 15 Ultra makes the opposite trade from Samsung on its main camera. It uses a 1-inch type sensor with only 50 MP, giving it 1.6 µm pixels. That choice prioritizes light gathering and natural background blur over raw resolution.
Pixel binning: why a 200 MP camera saves 12 MP photos
Pixel binning is the trick that makes high-megapixel phone sensors work. The sensor groups neighboring photosites and combines their signals into one larger “virtual” pixel.
Here is how it plays out on common sensors:
- 48 MP sensor, 4-to-1 binning: Four pixels in a 2×2 block act as one. Output is 12 MP.
- 50 MP sensor, 4-to-1 binning: Output is 12.5 MP.
- 200 MP sensor, 4-to-1 binning: Output is 50 MP.
- 200 MP sensor, 16-to-1 binning: A 4×4 block acts as one. Output is 12.5 MP.
Samsung’s ISOCELL HP2 sensor, used in the Galaxy S23, S24 and S25 Ultra, shows the effect clearly. Its native 0.6 µm pixels become effective 1.2 µm pixels at 50 MP and 2.4 µm pixels at 12.5 MP. That last figure is larger than the native pixels on almost any phone sensor.
To make binning possible, the color filters are arranged differently from a standard Bayer pattern. Instead of alternating red-green-blue every pixel, the filters come in clusters: four reds together, four greens together, and so on. Sony calls this Quad Bayer. Samsung uses names like Tetrapixel and Tetra²pixel. Apple calls its version a quad-pixel sensor.
What you actually get by default
Most phones save binned photos unless you ask otherwise. This is the answer to a question that comes up constantly on forums like r/GooglePixel: “My phone has a 50 MP camera, so why are my photos 12 MP?”
| Phone |
Sensor |
Default photo size |
Full-res option |
| Galaxy S25 Ultra |
200 MP |
12 MP |
50 MP or 200 MP mode |
| Pixel 10 Pro |
50 MP |
About 12 MP |
50 MP in Pro settings |
| iPhone 17 / 17 Pro |
48 MP |
24 MP |
48 MP in camera format settings |
Apple’s 24 MP default is a clever middle ground. The iPhone captures at both 12 MP (binned, for light and low noise) and 48 MP (for detail), then merges the data into a 24 MP file. You get a step up in detail over 12 MP without the large files and slower capture of full 48 MP.
The bottom line on binning: a high-megapixel sensor is best understood as a flexible sensor. It can act like a large-pixel 12 MP camera in the dark and a high-detail camera in daylight. The headline number describes its best case, not its everyday output.
The diffraction ceiling: why phone lenses limit megapixels
Here is a part of the story most explainers skip. Even with perfect sensors, physics caps how much detail a tiny phone lens can deliver.
Light passing through a lens opening spreads out slightly. This is called diffraction. Instead of focusing to a perfect point, each point of light lands as a small blurry disc (the Airy disk). Its diameter is roughly 2.44 x wavelength x f-number.
Run the numbers for a typical phone main camera:
- Green light wavelength: about 0.55 µm
- Aperture: f/1.7 (the Galaxy S25 Ultra’s main lens)
- Blur disc diameter: 2.44 x 0.55 x 1.7 ≈ 2.3 µm
Now compare that to the pixel size. The S25 Ultra’s native pixels are 0.6 µm wide. The diffraction blur from a perfect f/1.7 lens is nearly four pixels across. Neighboring pixels are essentially recording overlapping versions of the same blurred point.
Real phone lenses aren’t perfect either. Tiny plastic and glass elements add their own softness on top of diffraction, especially toward the corners.
This doesn’t make 200 MP useless. Oversampling (having more pixels than the lens can strictly resolve) still helps:
- Demosaicing gets more accurate, so colors and edges look cleaner.
- Binning gives the processor more data to reduce noise.
- Aliasing artifacts like moiré on fabric and screens become less likely.
But it does mean a 200 MP phone photo contains far less than 200 MP worth of real detail. Reviewers who compare full-resolution crops typically find a 200 MP shot only modestly sharper than a good 50 MP shot. Phone makers have no incentive to explain this, which is why it rarely appears on spec pages.
The diffraction limit is also why telephoto cameras can benefit from high resolution more than you might expect. Longer focal lengths project a larger image of the subject onto the sensor, so the 200 MP periscope cameras on phones like the Xiaomi 15 Ultra and vivo’s X-series flagships use that resolution to crop into extra zoom levels.
Watch out
A “200 MP” label does not mean 200 MP of detail. Lens size and diffraction cap real sharpness well below the sensor’s pixel count.
Megapixels vs megabytes
People mix up megapixels and megabytes all the time. They measure completely different things.
- Megapixels (MP) measure how many pixels are in an image.
- Megabytes (MB) measure how much storage the file takes up.
The two are linked, but compression breaks any simple ratio. An uncompressed 12 MP image with 8 bits per color channel would take about 36 MB (12 million pixels x 3 bytes). A typical 12 MP JPEG or HEIC from a phone takes only a few megabytes, because compression throws away data your eyes are unlikely to notice.
File format changes the size more than you might expect:
- HEIC/HEIF (default on iPhone and many Android phones): roughly half the size of an equivalent JPEG at similar quality.
- JPEG: universal compatibility, larger files.
- RAW/DNG: keeps all sensor data for editing, very large files.
Apple gives useful reference figures for its ProRAW format: about 25 MB for a 12 MP ProRAW image and about 75 MB for a 48 MP one. Shoot 1,000 full-resolution ProRAW photos on a vacation and you have used roughly 75 GB.
That cost travels. Large files fill phone storage faster, take longer to back up, and eat into cloud plans like iCloud+ and Google One. If you upload over mobile data, they can also burn through a capped plan, which matters on budget prepaid wireless carriers with tight data allowances.
Buying tip
If you plan to shoot at full resolution or in RAW often, buy at least 256 GB of storage. Base 128 GB models fill up fast with 50 MP and 200 MP files.
How many megapixels do you actually need?
The honest answer depends on what you do with your photos. For most people, a well-processed 12 MP image covers everything.
For screens and social media
Screens show far fewer pixels than modern cameras capture:
- A 6.3-inch iPhone 17 screen: about 3.2 million pixels (2622 x 1206)
- A 1080p laptop or monitor: about 2.1 million pixels
- A 4K TV: about 8.3 million pixels
Social platforms shrink your photos further. Instagram displays images at up to 1080 pixels wide, so a 1080 x 1350 portrait post is about 1.5 MP. Messaging apps compress photos too unless you choose an HD or original-quality option.
If your photos live on screens and social apps, anything above 12 MP is invisible at normal viewing size.
For prints
Printing is where resolution starts to count. Photo labs typically aim for 300 pixels per inch (ppi) for sharp prints viewed up close. Large prints hung on a wall can drop to 150-200 ppi, because you view them from farther away.
| Print size (inches) |
Pixels needed at 300 ppi |
Megapixels at 300 ppi |
Megapixels at 200 ppi |
| 4 x 6 |
1200 x 1800 |
2.2 MP |
1 MP |
| 5 x 7 |
1500 x 2100 |
3.2 MP |
1.4 MP |
| 8 x 10 |
2400 x 3000 |
7.2 MP |
3.2 MP |
| 11 x 14 |
3300 x 4200 |
13.9 MP |
6.2 MP |
| 16 x 20 |
4800 x 6000 |
28.8 MP |
12.8 MP |
| 24 x 36 |
7200 x 10800 |
77.8 MP |
34.6 MP |
A 12 MP phone photo prints beautifully at 8 x 10 and acceptably at 16 x 20 for wall viewing. Above that, a 48-50 MP full-resolution capture in good light gives you real headroom.
One caveat: those numbers assume the pixels contain real detail. A noisy, over-processed full-res night shot won’t print as well as a clean binned one, even if it has more pixels.
For cropping
This is the strongest argument for a high-megapixel sensor. Wildlife, kids’ sports, concerts, and any shot where you couldn’t get close enough all benefit from crop room.
The rule of thumb: every 2x crop (in each direction) divides your megapixels by four.
- 48 MP → 2x crop → 12 MP
- 200 MP → 2x crop → 50 MP → 4x crop → 12.5 MP
If you crop heavily, a 48-50 MP main sensor is the practical sweet spot. If you rarely crop, the megapixel count barely matters.
Megapixels and zoom
Phone makers lean on high-resolution sensors to fill the gaps between their physical lenses.
In-sensor zoom (sensor cropping). Apple’s 2x option on 48 MP iPhones uses the middle 12 MP of the sensor at full native resolution. No interpolation, no binning, just the center pixels. Apple calls it optical-quality 2x. On the iPhone 17 Pro, the same approach applied to the 48 MP 4x telephoto gives an 8x option.
Samsung does similar crops on the Galaxy S25 Ultra’s 200 MP main sensor for its 2x setting. The 50 MP 5x periscope then crops to deliver a 10x option.
Hybrid zoom. Between and beyond lens steps, phones combine cropping with multi-frame processing and AI upscaling. Google’s Pro Res Zoom on the Pixel 10 Pro pushes this to 100x using generative processing. Results at extreme zoom levels are partly reconstructed, so treat them as illustrations rather than records.
Pure digital zoom. Upscaling a small crop of a small sensor. This is where quality falls apart.
The takeaway: a high-megapixel telephoto camera gives you more usable zoom levels than a low-megapixel one. That is why 2024 and 2025 flagships moved from 10-12 MP telephotos to 48-200 MP units.
Megapixels in video
Video needs far fewer megapixels than stills. Every frame is a still image, and even 8K is modest by photo standards.
- 1080p (Full HD): 1920 x 1080 = about 2.1 MP per frame
- 4K UHD: 3840 x 2160 = about 8.3 MP per frame
- 8K: 7680 x 4320 = about 33.2 MP per frame
So any 12 MP sensor can record 4K. Recording 8K needs a sensor with at least about 33 MP, which is one practical reason Samsung moved to 108 MP and then 200 MP main sensors. The Galaxy S25 Ultra records 8K at 30 fps.
Higher-resolution sensors also help video stabilization. The phone can crop into a larger readout to stabilize footage while still delivering a full 4K frame.
For most people, 4K at 30 or 60 fps is the useful ceiling. 8K files are enormous, and few people own screens that can show the difference.
A short history of phone megapixels
Watching the megapixel race unfold shows how the industry learned, slowly, that more isn’t always better.
| Year |
Phone |
Main camera |
Why it mattered |
| 2000 |
Sharp J-SH04 (Japan) |
0.11 MP |
Widely cited as the first mass-market camera phone |
| 2007 |
Original iPhone |
2 MP |
Mainstreamed phone photography |
| 2012 |
Nokia 808 PureView |
41 MP |
Early pixel oversampling on a large sensor |
| 2015 |
iPhone 6s |
12 MP |
Started a long 12 MP era at Apple |
| 2017 |
Google Pixel 2 |
12.2 MP |
Proved processing could beat higher resolution |
| 2019 |
Xiaomi Mi Note 10 |
108 MP |
First 108 MP phone camera |
| 2021 |
Google Pixel 6 |
50 MP |
Google moved to a high-res binning sensor |
| 2022 |
Motorola Edge 30 Ultra (X30 Pro in China) |
200 MP |
First 200 MP phone camera |
| 2022 |
iPhone 14 Pro |
48 MP |
Apple’s first quad-pixel sensor |
| 2023 |
Samsung Galaxy S23 Ultra |
200 MP |
Samsung’s first 200 MP flagship |
| 2024 |
vivo X100 Ultra |
200 MP periscope |
200 MP arrives in telephoto cameras |
The Google chapter is the most instructive. Pixel 2 through Pixel 5 phones used 12.2 MP main sensors while rivals chased 48, 64 and 108 MP. Reviewers still regularly rated Pixel photos among the best of each year, thanks to HDR+ multi-frame processing. Google only moved to 50 MP with the Pixel 6, and even then saved 12.5 MP binned photos by default.
The Nokia 808 PureView deserves credit too. Back in 2012, it used a large 41 MP sensor mainly to oversample down to 5 MP or 8 MP images with less noise. That is essentially the binning strategy every flagship uses today.
What matters more than megapixels when you choose a phone
When you choose a phone for its camera, use the megapixel number as one line in a longer checklist. In rough order of importance:
- Main sensor size. Bigger sensors gather more light, produce less noise, and give more natural background blur.
- Image processing. HDR, noise reduction, color science and skin tones vary a lot between brands. Google, Apple, Samsung, Xiaomi and vivo each have a distinct look.
- Lens quality and aperture. A wider aperture (lower f-number) lets in more light. Lens sharpness affects edges and corners.
- Optical image stabilization (OIS). Critical for low light and video. Check that it covers the telephoto too, not just the main camera.
- Telephoto setup. A real optical telephoto (3x, 4x or 5x) beats any amount of main-sensor cropping at those focal lengths.
- Ultrawide quality. Many phones pair a strong main camera with a weak ultrawide. A 48-50 MP ultrawide is now common at the top end.
- Megapixels. Useful for cropping and printing, as covered above.
A practical example: the base iPhone 17 uses a 48 MP main camera and a 48 MP ultrawide, the same resolution on both rear lenses. That matters more for consistent photos across zoom levels than any single headline number.
Also be wary of extra cameras in the budget segment. A 2 MP macro camera rarely beats a crop from a decent main sensor. A 2 MP depth sensor mostly exists to pad the camera count, since modern phones estimate depth with software.
How to shoot at full resolution on your phone
If you bought a high-megapixel phone and want the extra detail, you usually have to switch it on. The exact menus vary by software version, but the general paths are:
- iPhone 15 and later (including iPhone 17): Go to Settings, then Camera, then Formats. Under Photo Mode, choose 24 MP or 48 MP. Pro models can also enable ProRAW at 48 MP. A toggle for resolution then appears in the Camera app.
- Samsung Galaxy S Ultra: In the Camera app, tap the aspect ratio and resolution control at the top of the viewfinder. Pick the 3:4 option labeled 50 MP or 200 MP.
- Google Pixel Pro models: Open camera settings and the Pro tab, then set resolution to 50 MP instead of 12 MP.
Use full resolution when you have:
- Bright daylight
- A still subject (landscape, architecture, product shot)
- A reason to crop or print large
Stay at the default resolution for low light, moving subjects, quick snaps and anything headed straight to social media. You get faster capture, better noise handling, and smaller files.
A side benefit: higher-resolution captures give visual search tools more to work with if you later crop into a sign, a label or a plant. If you use Google Lens on Android to identify things in your shots, a sharp 50 MP crop of a distant object gives it a better chance of a correct match than a blurry digital zoom.
So, does the megapixel count matter?
Yes, but less than the marketing implies, and only up to a point.
Megapixels matter if you crop often, print large, or want sharper zoom levels. A 48-50 MP main sensor on a decent-sized chip gives you all of that, with binning for clean low-light shots.
Past roughly 50 MP on a phone, returns shrink fast. Diffraction from small lenses, smaller individual pixels and heavier files all eat into the gains. A 200 MP sensor is a flexible tool, not a sharper camera by a factor of four.
If you are comparing two phones, look at sensor size, processing quality and telephoto hardware first. Use megapixels to break a tie.
FAQ
What are the best megapixels for a camera?
For a phone, a 48-50 MP main sensor that saves 12-24 MP photos by default is the sweet spot in 2025. It gives you crop room in daylight and binned, low-noise shots at night. For a dedicated camera, 24 MP covers most hobby photography, while landscape and studio shooters benefit from 45-60 MP bodies.
What is MP in mobile?
MP stands for megapixels, meaning one million pixels. On a phone spec sheet, “50 MP main camera” means the main camera sensor has about 50 million light-sensitive photosites. The photos it saves by default are often smaller, typically 12 MP, because of pixel binning.
Is 200 megapixels better than 48 megapixels?
Not automatically. A 200 MP sensor captures more detail in bright light and allows deeper cropping, but its individual pixels are smaller and phone lenses can’t resolve anywhere near 200 MP of real detail. A 48 MP sensor with larger pixels and strong processing often produces photos that look just as good, and Apple’s 48 MP iPhones regularly compete head to head with Samsung’s 200 MP Galaxy S Ultra in reviews.
How many mega pixel cameras are there?
There is no fixed list, because sensor makers produce many resolutions. On current phones, the most common camera sizes are 2 MP (macro and depth), 5 and 8 MP (budget ultrawides), 10-13 MP (older telephotos and selfies), 12 MP, 48-50 MP (most current main, ultrawide and telephoto cameras), 64 MP, 108 MP and 200 MP. The 200 MP sensors from Samsung’s ISOCELL line are the highest resolution in mass-market phones as of 2025.
Do more megapixels mean better low-light photos?
No. Low-light quality depends mostly on sensor size, pixel size, lens aperture, stabilization and multi-frame processing. High-megapixel sensors handle the dark by binning pixels together, which brings the output back down to around 12 MP.
Why does my 50 MP phone take 12 MP photos?
Your phone bins four pixels into one by default to reduce noise and keep file sizes manageable. That turns 50 MP into about 12.5 MP. You can usually switch to full 50 MP in the camera settings, which works best in good light with still subjects.
